Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
Fuel Injector: Service and Repair
REMOVAL
1. Remove fuel rail. Refer to Fuel Injector Rail Removal.
2. Disconnect clip(s) that retain fuel injector(s) to fuel rail (2).
INSTALLATION
1. Install fuel injector(s) into fuel rail assembly and install retaining clip(s).
2. If same injector(s) is being reinstalled, install new O-ring(s).
3. Apply a small amount of clean engine oil to each injector O-ring. This will aid in installation.
4. Install fuel rail. Refer to Fuel Rail Installation.
5. Start engine and check for fuel leaks.
