Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
Ignition Coil: Description and Operation
The 5.7L V-8 engine uses 8 dedicated, and individually fired coil (1) for each pair of spark plugs.
Each coil (5) is mounted directly to the top of each spark plug. Each coil is bolted (6) to the valve cover.
The ignition system is controlled by the Powertrain Control Module (PCM) on all engines.
A "wasted spark" system is used on the 5.7L engine combining paired, or dual-firing coils, and 2 spark plugs per cylinder. The coils and spark plugs are
connected with paired, secondary high-voltage cables.
Each cylinder is equipped with 1 dual-output coil. Meaning one coil mounts directly over one of the dual spark plugs for 1 high-voltage output. A second
high-voltage output is supplied directly from the same coil (using a plug cable) to one of the dual spark plugs on a corresponding (paired) cylinder on the
opposite cylinder bank.
Each coil fires 2 spark plugs simultaneously on each of the cylinder banks (one cylinder on compression stroke and one cylinder on exhaust stroke).
EXAMPLE : When the #1 cylinder is on compression stroke and ready for spark, the #1 coil will fire one of the dual spark plugs on the #1 cylinder
(directly below the coil). The other dual spark plug on the #1 cylinder will be fired by the #6 coil. At the same time, the #1 coil will fire a "wasted spark"
to one of the dual spark plugs at the #6 cylinder as coil #6 also fires a "wasted spark" to one of the dual spark plugs at the #6 cylinder.
