Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
3. A locating pin (5) is used in place of one of the PCM mounting bolts. Pry clip (4) from pin (5).
4. Remove two PCM mounting bolts (2), and remove PCM from vehicle.
5. Position ground strap (3) to the side.
INSTALLATION
1. Install clip (4) to pin (5).
2. Position PCM (1) to body and install two bolts (2). Be sure to position ground strap (3) before installing bolt.
3. Tighten two bolts (2) to 3-5 Nm (30-40 in. lbs.).
