Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
4. Remove the three screws (2) that secure the ORC (3) to the ORC mount welded onto the top of the floor panel transmission tunnel (1).
5. Remove the ORC from the ORC mount.
INSTALLATION
1. Carefully position the Occupant Restraint Controller (ORC) (3) onto the ORC mount on the floor panel transmission tunnel (1). The bottom of the
ORC housing is keyed. When the ORC is correctly positioned, the bottom of the housing will fit flush with the mount and the orientation arrow on
the label on top of the housing will be pointed forward in the vehicle.
2. Install and tighten the three screws (2) that secure the ORC to the ORC mount that is welded onto the floor panel transmission tunnel. Tighten the
screws to 14 N.m (10 ft. lbs.).
