Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
The lower anchors are integral to the rear seat back panel bracket (1), which is secured with screws to the rear floor panel just forward of the rear seat
back panels and beneath the rear edge of the rear seat cushion. These anchors are each constructed from a heavy-gauge steel wire loop that is securely
welded to the seat back panel bracket. The child restraint upper tether anchors cannot be adjusted or repaired and, if faulty or damaged, they must be
replaced as a unit with the rear seat back panel bracket.
The rear seat lower anchors (2) are each accessed from the front of their respective seat, at each side where the seat back meets the seat cushion. Round
markers (1) with an imprinted child seat icon help identify the anchor locations as they may be otherwise difficult to see with the seat back in the upright
position.
See the vehicle glove box for more information on the proper use of all of the factory-installed child restraint anchors.
