Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
1. Position the rear center seat belt and retractor unit onto the front of the left seat back panel (1).
2. Install and tighten the screw (2) from the back of the seat back panel that secures the retractor. Tighten the screw to 43 N.m (32 ft. lbs.).
3. Route the retractor lock cable (2) from the retractor to the seat back latch mechanism (3) on the upper outboard corner of the seat back panel (4).
4. Engage the lock cable end fitting to the seat back latch mechanism.
5. Route the seat belt lower anchor through the web guide loop integral to the top of the seat back panel.
6. Reinstall the trim onto the left rear seat back.
7. Reinstall the left rear seat back panel into the vehicle.
