Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
INSTALLATION
1. Position the left multi-function switch (1) onto position on the Steering Control Module (SCM) (2).
2. Engage the two retaining tabs, next to the screw mounts that secure the left multi-function switch and firmly snap into place.
3. Install the two screws (3) that secure the left multifunction switch to the SCM. Tighten the screws to 2.5 Nm (22 in. lbs.).
4. Position the lower steering column shroud (2) to the underside of the steering column.
5. Install the three screws (1) that secure the lower steering column shroud to the multi-function switch mounting housing. Tighten the screws to 2
Nm (17 in. lbs.).
6. Position the upper column shroud (3) over the steering column with the hazard warning switch button inserted through the hole in the upper
shroud.
7. Align the snap features on the upper and lower shrouds and apply hand pressure to snap them together.
8. Reconnect the battery negative cable.
