Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
4. Disconnect the battery positive cable terminal clamp (4) from the battery positive terminal post. If necessary, use a battery terminal puller to
remove the terminal clamp from the battery post.
5. Remove the screw (1) that secures the battery negative cable eyelet terminal (2) to the inner fender (3).
6. Unlatch and open the cover on the Power Distribution Center (PDC)(1) and Integrated Power Module (IPM)(2).
7. Remove the two nuts that secure the battery positive cable eyelet terminal to the B(+) terminal studs in the PDC.
