Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
Stabilizer Link: Service and Repair
Front Suspension
STABILIZER LINK
REMOVAL
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the upper link bolt/nut (1 & 2).
4. Remove the lower link bolt (6).
5. Remove the stabilizer link (3).
INSTALLATION
1. Install the stabilizer link (3) to the vehicle.
2. Install the lower link bolt (6) and tighten to 115 Nm (85 ft. lbs.).
3. Install the upper link bolt/nut (1 & 2) and tighten to 135 Nm (100 ft. lbs.).
4. Install the tire and wheel assembly.
5. lower the vehicle.
