Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
8. Slide the collar (3) on the Bearing Remover 9082 (1) downward over the fingers of the tool.
9. Remove the output shaft bearing (3).
CAUTION: Verify that the geartrain end-play shim has remained on the output shaft and against the park gear. The shim may be adhered to the
bearing inner race. Retrieve the shim from the bearing and install over the output shaft and against the park gear.
INSTALLATION
CAUTION: Verify that the geartrain end-play shim is properly installed over the output shaft and against the park gear.
NOTE: The closed side of the bearing must be installed toward the parking lock gear. If the bearing is installed in the other direction, the
transmission gearcase will need to be removed in order to remove the bearing.