Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
2. Slip O-ring (2) through backing plate, then push axle through backing plate until bearing (1) is exposed.
3. Install new O-ring (2) on axle bearing (1).
4. Push axle into axle tube.
5. Install axle (2) flange nuts (1) and tighten to 119 Nm (88 ft. lbs.).
6. Install speed sensors (2) in axle tube (1) flange.
7. Install calipers and rotors.
Seal - Pinion
