Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
14.
Verify that the LRSM part number has updated. Using the StarSCAN at the "Home" screen:
a.
Select "ECU View".
b.
Touch the screen to highlight the LRSM in the list of modules.
c.
Select "More Options".
d.
Select "ECU Flash".
e.
Verify that the "Part Number", displayed on the "Flash LRSM" screen, has changed to the updated part number.
NOTE:
Due to the LRSM programming procedure, a DTC may be set in other modules (PCM, TCM, BCM, MIC, SKIM, etc.) within the vehicle, if so
equipped. Some DTC's may cause the MIL to illuminate. Check all modules using "ECU View" from the Home screen, record the DTC's, and erase
these DTC's prior to returning the vehicle to the customer. Erase any DTC's in the PCM only after all other modules have had their DTC's erased.
NOTE:
The following step is required by law.
15.
Type the necessary information on the 'Authorized Modification Label" p/n 04275086AB and attach near the VECI label (Fig. 1).
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
