Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
NOTE: Make sure to properly connect the washer hoses to the windshield washer pump. Failure to properly connect the hoses will cause the front
and rear washer systems to operate incorrectly.
3. Properly connect the two washer hoses (3) to the barbed outlet nipples of the windshield washer pump.
4. Connect the wire harness connector (1) to the top of the windshield washer pump.
5. Install the liner into the left front fender wheel house.
6. Lower the vehicle.
7. Refill the washer reservoir with the washer fluid drained during removal.
8. Reconnect the negative battery cable.
