Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
Wiper Arm: Service and Repair
Wiper Arm Park Ramp
REMOVAL
1. Disengage the rear wiper arm from the wiper arm park ramp (5) located on the right side of the lift-gate just below the liftgate flip-up glass.
2. Lift the rear wiper arm and blade away from the lift-gate until the wiper arm hinge is in its over-center position.
3. Remove the screw (6) that secures the wiper arm park ramp to the liftgate outer panel.
4. Remove the wiper arm park ramp from the liftgate outer panel.
INSTALLATION
1. Position the rear wiper arm park ramp (5) onto the liftgate outer panel.
2. Install the screw (6) that secures the wiper arm park ramp to the liftgate outer panel. Tighten the screw to 5.6 N.m (50 in. lbs.).
3. Position the rear wiper arm and blade into the wiper arm park ramp.
