Grand Cherokee 2WD Limited V8-4.7L (2002)
Fig. 3
3. Firmly grip both ends of the glove box door, then twist and pull the door as necessary to disengage the inboard hinge hook from the inboard hinge
pin on the instrument panel and reorient the hook to the underside of the hinge pin (Fig. 3).
4
.Raise the glove box door until it is perpendicular to the instrument panel.
5. Twist the door slightly in the counterclockwise direction and use a jiggling action to disengage the remaining two hinge hooks from their
respective hinge pins on the instrument panel.
6. Remove the glove box from the instrument panel.
INSTALLATION
WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, DISABLE THE AIRBAG SYSTEM BEFORE ATTEMPTING ANY
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. DISCONNECT AND
ISOLATE THE BATTERY NEGATIVE (GROUND) CABLE, THEN WAIT TWO MINUTES FOR THE AIRBAG SYSTEM CAPACITOR
TO DISCHARGE BEFORE PERFORMING FURTHER DIAGNOSIS OR SERVICE. THIS IS THE ONLY SURE WAY TO DISABLE THE
AIRBAG SYSTEM. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT
AND POSSIBLE PERSONAL INJURY.
NOTE: Be certain to use care not to damage or remove the glove box hinge bumpers on the lower instrument panel glove box opening reinforcement
when installing the glove box onto the instrument panel.
Fig. 3
