Grand Cherokee 2WD Limited V8-4.7L (2002)
Door Module: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the front door.
Fig.8 Door Module Remove/Install
3. Remove the door module from the back of the front door trim panel.
4. Remove the door module from the front door trim panel.
INSTALLATION
1. Position the door module onto the front door trim panel.
2. Install the door module to the back of the front door trim panel. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Reinstall the trim panel onto the front door.
4. Reconnect the battery negative cable.
