Grand Cherokee 2WD Limited V8-4.7L (2002)
Luggage Rack: Service and Repair
LUGGAGE RACK
REMOVAL
NOTE: The skid strips are attached to the roof panel with adhesive.
1. Using a trim stick C-4755 or equivalent, pry support cover off.
2. If necessary, slide the crossbars to expose the screws attaching the slide rails to the supports.
3. Remove the screws retaining the slide rails to the supports.
4. Remove the screws attaching the supports to the roof panel.
5. Separate the supports from the roof panel.
NOTE: If a crossbar needs to be serviced, the forward or rearward supports will have to be removed.
INSTALLATION
1. Position the supports on the roof panel and install the screw. Be sure that the gasket is properly seated.
2. Position the luggage rack on the supports.
3. Install the screws attaching the side rails to the supports.
4. Position the supports covers on the supports and press into place.