Grand Cherokee 2WD Limited V8-4.7L (2002)
Fig. 10
2. Pull the release knob from the lever (Fig. 10).
INSTALLATION
1. Position the release knob on the lever and press to snap in place.
Rear Headrest Folding Mechanism
REAR HEADREST FOLDING MECHANISM
REMOVAL
1. Remove the head rest.
Fig. 10
2. Remove folding mechanism cover (Fig. 10).
3. Remove the screws that secure the head rest bun to the folding mechanism.
NOTE: The folding release knob is always located on the outboard side.
INSTALLATION
1. Position the head rest bun on the folding mechanism and install the screws.
2. Install the folding mechanism cover.
3. Install the head restraint.
Rear Headrest Sleeve
REAR HEADREST SLEEVE
REMOVAL
1. Remove seat back.
2. Remove head rest.
3. Remove head rest caps.
4. Remove seat back cover.
5. Rotate head rest sleeve 1/4 turn counter-clockwise to release retaining tab.
6. Pull sleeve from seat back frame.
INSTALLATION
