Grand Cherokee 2WD Limited V8-4.7L (2002)
7. Compress the cable retainer with a 13 mm wrench and remove the cable from the parking brake lever bracket.
8. Remove the park brake lever mounting nuts and console bracket.
9. Lift the lever assembly off the mounting studs and pull the front cable out of the lever bracket.
INSTALLATION
1. Install the lever assembly on the mounting studs while feeding the front cable into the lever bracket.
2. Install the console bracket and mounting nuts.
3. Engage the front cable end to the lever.
4. Connect parking brake switch wire connector.
5. Pull on the lever to release the lock out spring.
6. Install center console.
7. Fold down the rear carpet cover and rear seat.
