Grand Cherokee 2WD Limited V8-4.7L (2002)
Fuel Gauge Sender: Service and Repair
REMOVAL
Fig. 6 Fuel Gauge Sending Unit Location
The fuel gauge sending unit (fuel level sensor) and float assembly is located on the side of fuel pump module (Fig. 6). The fuel pump module is
located within the fuel tank.
1. Remove fuel tank. Refer to Fuel Tank Removal/Installation.
2. Remove fuel pump module. Refer to Fuel Pump Module Removal/Installation.
Fig. 7 Fuel Gauge Sending Unit Release Tab
3. Remove electrical wire connector at sending unit terminals.
