Grand Cherokee 2WD Limited V8-4.7L (2002)
License Plate Lamp: Service and Repair
License Plate Lamp Unit Replacement
Fig.21 License Plate Lamp Housing
REMOVAL
1. Remove the screws retaining the lamp housing/trim panel to the liftgate.
2. Disconnect the wire harness for the license plate lamps and the flip up glass switch, if equipped.
3. Remove the license plate lamps and the flip up glass switch, if equipped.
4. Remove the license plate lamp housing.
INSTALLATION
1. Install the license plate lamps, and the flip up glass switch, if equipped.
2. Connect the wire harnesses for the license plate lamps and the flip up glass switch.
3. Install the lamp housing/trim panel on the liftgate.