jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Rain Sensor Module|Page 8507 > < Rain Sensor Module
Page 2
background image

NOTE:  The spring clips on the RSM will become deformed after numerous (about ten) removal and installation cycles. If the spring clips become
deformed, the RSM must be replaced with a new unit.

5. Align and engage the top of the trim cover over the top of the RSM.
6. Using hand pressure press the bottom of the trim cover toward the windshield glass until it snaps over the bottom of the RSM
7. Reconnect the battery negative cable.

Rain Sensor Module|Page 8507 > < Rain Sensor Module