Grand Cherokee 2WD Limited V8-4.7L (2002)
Fig.31 Multi-Function Switch Mounting Housing Screw Remove/Install
3. Install and tighten the screw that secures the multi-function switch housing to the top of the column housing (Fig. 31). Tighten the screw to 1.9 Nm
(17 in. lbs.).
4. Reinstall the right multi-function switch onto the multi-function switch housing. (Refer to ELECTRICAL/WIPERS/WASHERS/RIGHT
MULTIFUNCTION SWITCH - INSTALLATION).
5. Reinstall the left multi-function switch onto the multi-function switch housing. (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/LEFT
MULTI-FUNCTION SWITCH - INSTALLATION - LEFT MULTI-FUNCTION SWITCH).
6. Reinstall the clockspring onto the multi-function switch housing. (Refer to ELECTRICAL/RESTRAINTS/CLOCKSPRING - INSTALLATION).
7. Reconnect the battery negative cable.