Grand Cherokee 2WD Limited V8-4.7L (2002)
INSTALLATION - 3/8" RETURN HOSE
1. Install the hoses to the vehicle.
2. Reconnect the rubber hose to the steering cooler outlet tube Tighten the hose clamp.
3. Reconnect the rubber hose to the power steering reservoir Tighten the hose clamp.
4. Install the air box.
5. Refill the power steering fluid and bleed the system.
INSTALLATION - 3/8" GEAR OUTLET HOSE
NOTE: Lubrication and a new O-ring must be used when reinstalling.
1. Install the hoses to the vehicle.
2. Reconnect the rubber hose to the steering cooler inlet tube Tighten the hose clamp.
3. Reconnect the metal tube to the power steering gear Tighten the hose to 22.5 Nm (17 ft. lbs.).
4. Install the air box.
5. Refill the power steering fluid and bleed the system.
INSTALLATION - INLET COOLER HOSE
1. Install the cooler hose to the vehicle.
2. Reconnect the cooler hose at the gear.
3. Reconnect the lower hose at cooler. Tighten the hose to 22.5 Nm (17 ft. lbs.)
4. Install the bracket holding the cooler hoses.
5. Install the air box.
6. Install the grille opening reinforcement panel
7. Install the front fascia grille assembly.
8. Reconnect negative battery cable at battery.
9. Refill the power steering fluid and bleed the system.
INSTALLATION - OUTLET COOLER HOSE
1. Install the cooler hose to the vehicle.
2. Reconnect the cooler hose at the reservoir.
3. Reconnect the upper hose at the cooler. Tighten the hose to 22.5 Nm (17 ft. lbs.)
4. Install the bracket holding the cooler hoses. Tighten the bracket to 22.5 Nm (17 ft. lbs.)
5. Install the air box.
6. Install the grille opening reinforcement panel
7. Install the front fascia grille assembly.
8. Reconnect negative battery cable at battery.
9. Refill the power steering fluid and bleed the system.
