Grand Cherokee 2WD Limited V8-4.7L (2002)
Battery Temperature Sensor: Service and Repair
Fig.1 Battery Temperature Sensor Location
REMOVAL
The battery temperature sensor is located under the vehicle battery (Fig. 1) and is attached to a mounting hole on the battery tray.
The battery temperature sensor is located under the vehicle battery (Fig. 1) and is attached to a mounting hole on the battery tray
1. Remove battery. Refer to Battery for procedures.
2. Remove battery tray
3. Pull sensor up from battery tray and disconnect engine wire harness.
4. Remove sensor from battery tray.
INSTALLATION
The battery temperature sensor is located under the vehicle battery (Fig. 1) and is attached to a mounting hole on the battery tray
1. Position sensor into mounting hole and attach wiring harness.
2. Press sensor into top of battery tray.
3. Install battery. Refer to Group 8A, Battery for procedures.
