jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Fuel Tank - Premature Fueling Nozzle Shut Off|Page 3370 > < Fuel Tank - Premature Fueling Nozzle Shut Off|Page 3368
Page 4
background image

16.

Verity that the evaporative canister vent hose is routed through the plastic clip and is positioned next to the fuel filler metal vent tube. Tie wrap the
evaporative canister vent hose to the fuel filler metal vent tube. The vent hose must be pointing up. (Fig. 2).

NOTE:

THE VENT HOSE MUST BE SECURELY TIE WRAPPED TO THE FUEL FILLER METAL VENT TUBE, BUT DO NOT CRUSH VENT
HOSE.

17.

Lower the vehicle.

18.

Using the DRB III(R), perform an evaporative system leak test to verity that no leaks are present in the evaporative system.

19.

Raise the vehicle.

20.

Install the left rear stone shield and new rivets, p/n 34201631.

21.

Install the left rear wheel and tire assembly to the rear axle. Tighten the wheel lug nuts to 136 Nm (100 ft. lbs.).

22.

Lower the vehicle.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE

Fuel Tank - Premature Fueling Nozzle Shut Off|Page 3370 > < Fuel Tank - Premature Fueling Nozzle Shut Off|Page 3368