Grand Cherokee 2WD Limited V8-4.7L (2002)
19.
For vehicles equipped with a trailer hitch, loosen but do NOT remove, the two (2) rear-most trailer hitch bolts (Figure 14).
20.
For vehicles equipped with a trailer hitch, use a pry bar (between brush guard/skid plate and hitch) to flex the left upper leg of the brush guard/skid
plate inboard to allow it to pass below the trailer hitch (Figure 14).
21.
For vehicles equipped with a trailer hitch, use a pry bar (between brush guard/skid plate and hitch) to flex the right upper leg of the brush
guard/skid plate inboard to allow it to pass below the trailer hitch (Figure 14).
22.
Lower the fuel tank assembly about 4-6 inches.
23.
Loosen the fuel filler hose clamp at the fuel tank nipple. Disconnect the filler hose from the fuel tank.
24.
Disconnect the vapor vent hoses from the fuel tank vents.
25.
Lower the fuel tank assembly and place it on the floor.
26.
Clean any dirt and debris from the area around the fuel pump module.
