jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Recall - EVAP Canister Vent Hose & Filler Check Valve|Page 3605 > < Recall - EVAP Canister Vent Hose & Filler Check Valve|Page 3603
Page 14
background image

27.

Disconnect the two (2) fuel lines from the fuel pump module fittings (Figure 15).

28.

Using Special Tool # 6856, remove the fuel pump module lock nut (Figure 16).

29.

Remove the fuel pump module from the fuel tank. Be careful to not damage the fuel gauge float (Figure 15).

30.

Remove the two (2) fuel tank strap nuts (Figure 15).

31.

Remove the fuel tank vent hose from the fuel tank (Figure 15).

32.

Separate the fuel tank from the fuel tank brush guard/skid plate.

33.

Install the new fuel tank into the fuel tank brush guard/skid plate.

34.

Install the fuel tank vent hose onto the fuel tank (Figure 15). Make sure that the vent hose is fully seated into the fuel tank channel.

35.

Tighten the fuel tank strap bolts to 37 ft-lbs (50 N.m).

Recall - EVAP Canister Vent Hose & Filler Check Valve|Page 3605 > < Recall - EVAP Canister Vent Hose & Filler Check Valve|Page 3603