Grand Cherokee 2WD Limited V8-4.7L (2002)
25.
Lower the fuel tank assembly and place it on the floor.
26.
Clean any dirt and debris from the area around the fuel pump module.
27.
Disconnect the two (2) fuel lines from the fuel pump module fittings (Figure 9).
28.
Using Special Tool # 6856, remove the fuel pump module lock nut (Figure 10).
29.
Remove the fuel pump module from the fuel tank. Be careful to not damage the fuel gauge float (Figure 9).
30.
Remove the two (2) fuel tank strap nuts (Figure 9).
31.
Remove the fuel tank vent hose from the fuel tank (Figure 9).
32.
Separate the fuel tank from the fuel tank brush guard/skid plate.
33.
Install the new fuel tank into the fuel tank brush guard/skid plate.
34.
Install the fuel tank vent hose onto the fuel tank (Figure 9). Make sure that the vent hose is fully seated into the fuel tank channel.
