Grand Cherokee 2WD Limited V8-4.7L (2002)
Crankshaft Position Sensor: Service and Repair
Fig. 22 CKP Sensor Location - 4.7L V-8 Engine
REMOVAL
The Crankshaft Position (CKP) sensor is bolted to the side of the engine cylinder block above the starter motor. It is positioned into a machined hole
at the side of the engine block.
1. Remove starter motor. Refer to Starter Removal/Installation.
2. Disconnect CKP electrical connector at sensor.
Fig. 23 CKP Sensor Removal/Installation - 4.7L V-8 Engine
3. Remove CKP mounting bolt.
