Grand Cherokee 2WD Limited V8-4.7L (2002)
19.
Remove the screws that secure the right I/P end cap to the I/P top pad and glove box opening. Disengage the snap clip and then remove the end
cap (Figure 5).
20.
Remove the screws that secure the lower right center bezel to the I/P glove box opening. Disengage the two (2) snap clips and then remove the
lower right center bezel (Figure 6).
21.
Remove the right side I/P top pad screws (3) and bolts (2) from the glove box opening area.
22.
Remove the screw above the radio location that secures the center of the I/P top pad.
23.
Disconnect the speaker electrical connectors and harness clips on the top of the I/P.
24.
Remove the Ultra Light sensor (if equipped) (Figure 1).
25.
Remove the upper I/P top pad nuts (4) and screws (5) from along the top front edge of the top pad and then disconnect the defroster duct clips
from the I/P top pad.
26.
Remove the I/P top pad.
