jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Auxiliary Power Outlet|Testing and Inspection > < Cigar Lighter Outlet|Page 5093
Page 1
background image

Auxiliary Power Outlet: Description and Operation
Power Outlet Relay

POWER OUTLET RELAY

The power outlet / cigar lighter relay is an electromechanical device that switches fused battery current to the cigar lighter or power outlet when the
ignition switch is turned to the Accessory or ON positions. The power outlet / cigar lighter relay is located in the junction block, below the driver side
of the instrument panel in the passenger compartment.

The cigar lighter relay is a International Standards Organization (ISO) relay Relays conforming to the ISO specifications have common physical
dimensions, current capacities, terminal patterns, and terminal functions.

The cigar lighter relay cannot be repaired or adjusted and, if faulty or damaged, it must be replaced.

The ISO relay consists of an electromagnetic coil, a resistor or diode, and three (two fixed and one movable) electrical contacts. The movable
(common feed) relay contact is held against one of the fixed contacts (normally closed) by spring pressure. When the electromagnetic coil is
energized, it draws the movable contact away from the normally closed fixed contact, and holds it against the other (normally open) fixed contact.

When the electromagnetic coil is de-energized, spring pressure returns the movable contact to the normally closed position. The resistor or diode is
connected in parallel with the electromagnetic coil in the relay, and helps to dissipate voltage spikes that are produced when the coil is de-energized.

Auxiliary Power Outlet|Testing and Inspection > < Cigar Lighter Outlet|Page 5093