jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

IOD Fuse|Page 5243 > < IOD Fuse|Page 5241
Page 2
background image

CAUTION:  Do not open any doors, or turn ON any electrical accessories with the lowest milliampere scale selected, or the multi-meter may be
damaged.

6. Observe the multi-meter reading. The low-amperage IOD should not exceed 35 milliamperes (0.035 ampere). If the current draw exceeds 35

milliamperes, isolate each circuit using the fuse and circuit breaker remove-and-replace process in Step 5. The multi-meter reading will drop to
within the acceptable limit when the source of the excessive current draw is disconnected. Repair this circuit as required; whether a wiring short,
incorrect switch adjustment, or a component failure is at fault.

IOD Fuse|Page 5243 > < IOD Fuse|Page 5241