Grand Cherokee 2WD Limited V8-4.7L (2002)
Fig.11 Starter Wire Harness Remove/Install - 4.0L Engine
Fig.12 Starter Wire Harness Remove/Install - 4.7L Engine
5. Lower the starter motor from the front of the automatic transmission torque converter housing far enough to access and remove the nut that secures
the battery cable eyelet to the solenoid battery terminal (Fig. 11) or (Fig. 12). Always support the starter motor during this process, do not let the
starter motor hang from the wire harness.
6. Remove the battery cable eyelet from the solenoid battery terminal. Always support the starter motor during this process, do not let the starter
motor hang from the wire harness.
7. Disconnect the solenoid terminal wire harness connector from the connector receptacle on the starter solenoid. Always support the starter motor
