jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Power Steering - Moan/Whine on Turns|Page 5609 > < Power Steering - Moan/Whine on Turns|Page 5607
Page 3
background image

3.

Position each hose so that no contact between the two hoses is present. Maintain a minimum distance of 3.2 mm (0.125 inches) between the two
hoses. Do not separate the two hoses too far or possible hose contact with other vehicle components (i.e. air box snorkel) may occur. (Fig. 2)

4.

Tighten both hose connections to 22.5 Nm (17 ft. lbs.).

POLICY:
Reimbursable within the provisions of the warranty

TIME ALLOWANCE:

FAILURE CODE:

Power Steering - Moan/Whine on Turns|Page 5609 > < Power Steering - Moan/Whine on Turns|Page 5607