Grand Cherokee 2WD Limited V8-4.7L (2002)
Fluid Filter - A/T: Service and Repair
Transmission Fill
TRANSMISSION FILL
To avoid overfilling transmission after a fluid change or overhaul, perform the following procedure:
1. Remove dipstick and insert clean funnel in transmission fill tube.
2. Add following initial quantity of Mopar ATF +4 to transmission:
a. If only fluid and filter were changed, add 10 pints (5 quarts) of ATF +4 to transmission.
b. If transmission was completely overhauled, torque converter was replaced or drained, and cooler was flushed, add 24 pints (12 quarts) of
ATF +4 to transmission.
3. Check the transmission fluid and adjust as required.