Grand Cherokee 2WD Limited V8-4.7L (2002)
Fluid Pump: Service and Repair
Disassembly/Assembly
DISASSEMBLY
1. Remove the bolts holding the reaction shaft support to the oil pump (Fig. 91).
2. Remove the reaction shaft support from the oil pump (Fig. 91).
3. Remove all bolts holding the oil pump halves together (Fig. 91).
4. Using suitable prying tools, separate the oil pump sections by inserting the tools in the supplied areas and prying the halves apart.
NOTE: The oil pump halves are aligned to each other through the use of two dowels. Be sure to pry upward evenly to prevent damage to the oil
pump components.