jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Procedures|Page 8768 > < Procedures
Page 2
background image

7. Remove the fasteners retaining the regulator.
8. Remove the regulator.

INSTALLATION

1. Position the window regulator in the door.
2. Install the fasteners retaining the regulator.
3. Install the door glass.
4. Install the window clips retaining regulator.
5. Lower the door glass.
6. Install the stationary glass.
7. Connect the power window and speaker harness if equipped.
8. Install the waterdam.
9. Cycle the glass and check for proper operation.

Procedures|Page 8768 > < Procedures