jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Bumper Fascia - Squeak/Creak From Headlamp Area|Page 6602 > < Diagram Information and Instructions|Page 6591
Page 1
background image

Front Bumper Cover / Fascia: All Technical Service Bulletins
Bumper Fascia - Squeak/Creak From Headlamp Area

NO.:
23-24-92

GROUP:
Body

DATE:
Oct. 19, 1992

SUBJECT:
Front Bumper Sill Squeak

MODELS:

1993 (ZJ) Grand Cherokee

SYMPTOM/CONDITION:

Some vehicles may exhibit a squeak or creak coming from the area of the headlights, when the steering wheel is turned.

REPAIR PROCEDURE:

This bulletin involves removing the front bumper fascia and replacing a plastic fastener with a 6 mm bolt.

1.

Remove the front bumper fascia following the procedure outlined in the service manual.

CAUTION:
WHEN REMOVING THE HEADLIGHTS, USE CARE NOT TO DAMAGE THE RETAINING CLIPS.

2.

Inspect the area below the headlight for the presence of a plastic fastener (see illustration).

3.

Remove the fastener and install a 6 X 30 mm bolt, lockwasher and nut. Torque the bolt to 120 inch lbs.

4.

Install the bumper fascia and road test to verify the repair.

POLICY:
Reimbursable within the provisions of the warranty.

Bumper Fascia - Squeak/Creak From Headlamp Area|Page 6602 > < Diagram Information and Instructions|Page 6591