Grand Cherokee 4WD L6-242 4.0L VIN S MFI (1993)
Right Power Door Switches
9. If necessary, remove power switches from door panel.
10. Disconnect handle latch and lock rods.
11. Remove window crank handle.
INSTALLATION
1. Connect rods to inside handle assembly. Install handle assembly. Tighten screws to 2 Nm (16 in-lbs) torque.
2. Apply adhesive/sealant to edges of door waterdam.
3. Position waterdam on door inner panel. Press it inward to attach it to inner panel.
4. If removed, install power door switches.
5. Position trim panel on door inner panel. For vehicles equipped with power door locks/windows, connect wire harness connectors. Press nylon
retainers inward to attach it to inner panel.
6. Install armrest screw. Install demister slot screw. Install mirror bezel screw. Tighten screws to 4 Nm (34 in-lbs) torque.
7. Install window crank handle.
