Grand Cherokee 4WD L6-242 4.0L VIN S MFI (1993)
Door Lock Cylinder: Service and Repair
1. Remove door trim panel and waterdam. If necessary. refer to removal procedure.
Key Lock Cylinder & Door Latch
2. Disconnect door latch lock cylinder rod at door latch.
Security Alarm Switch
3. If equipped, disconnect security alarm switch connector from lock cylinder.
4. Remove key lock cylinder retainer clip. Remove lock cylinder, gasket and clip from door.
5. If applicable, remove door latch lock cylinder rod from original lock cylinder. Connect it to replacement lock cylinder.
6. For installation, reverse removal procedure.
