jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Head Rest - Rattle On Rough Roads|Page 7407 > < Child Seat - Tether Anchor Part Numbers & Labor Time|Page 7398
Page 1
background image

Head Rest: All Technical Service Bulletins
Head Rest - Rattle On Rough Roads

NO: 23-90-94

GROUP: Body

DATE: Dec. 2, 1994

SUBJECT:
Head Rest Rattle

MODELS:

1993 - 1995 (ZJ) Grand Cherokee

SYMPTOM/CONDITION:

Head rest may rattle while driving over rough roads.

DIAGNOSIS:

Road test the vehicle over rough roads. If the rattle is present, perform the repair procedure.

PARTS REQUIRED:

AR

4798107

Sleeve

REPAIR PROCEDURE:

This bulletin involves installing a plastic sleeve on the head rest support post.

1.

Remove the head rest by rotating the locking mechanism.

2.

Remove the two screws from the bottom of the head rest and remove the head rest support assembly from the head rest pad. Make note of the
direction that the support post detents are facing.

3.

Install the plastic sleeve as shown.

4.

Install the support assembly into the head rest pad and tighten the two screws.

5.

Install the headrest into the seat.

Head Rest - Rattle On Rough Roads|Page 7407 > < Child Seat - Tether Anchor Part Numbers & Labor Time|Page 7398