jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Heater Core Case > < Expansion Block/Orifice Tube|Description and Operation|Page 5914
Page 1
background image

Heater Core: Service and Repair

Fig.59 Heater Core

REMOVAL

1. Remove the heater-A/C unit from the vehicle.

Under Heater-A/C Unit See: Housing Assembly HVAC/Service and Repair/Heater - A/C Housing Removal and Installation

2. Remove the heater core retaining screws.
3. Pull the heater core straight out of the housing.

INSTALLATION

1. Install the heater core into the housing.
2. Position the clips over the heater core tubes. Install and tighten the screws.
3. Install the heater-A/C unit into the vehicle.

Under Heater-A/C Unit See: Housing Assembly HVAC/Service and Repair/Heater - A/C Housing Removal and Installation

Heater Core Case > < Expansion Block/Orifice Tube|Description and Operation|Page 5914