Grand Cherokee 4WD L6-242 4.0L VIN S MFI (1993)
12.
Install the knuckle. Tighten the lower nut to 125 Nm (90 ft. lbs.). Tighten the upper nuts to 100 Nm (75 ft. lbs.).
13.
Install the cotter pins
14.
Install the axle shaft, hub and bearing. Tighten the nut to 100 Nm (75 ft. lbs.).
15.
Install the rotor and caliper. Tighten the caliper bolts to 15 Nm (10 ft. lbs.).
16. Grease the ball joint.
17.
Install the wheel and tire assembly. Tighten the lug nuts to 125 Nm (100 ft. lbs.).
