Grand Cherokee 4WD L6-242 4.0L VIN S MFI (1993)
Alignment: All Technical Service Bulletins
Alignment - Insufficient Caster Adjustment
NO.: 02-05-93 Rev. A
GROUP: Front Suspension
DATE: Sep. 24, 1993
SUBJECT:
Insufficient Caster Adjustment
NOTE:
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN NO. 02-05-93. THE CHANGES INVOLVED A CORRECTED MDH AND
PART NUMBER. THE CHANGES ARE HIGHLIGHTED WITH **ASTERISKS**.
MODELS:
1993
(ZJ) Grand Cherokee/Grand Wagoneer
**NOTE: THIS BULLETIN APPLIES TO VEHICLES BUILT BEFORE MDH 07-20-XX. **
SYMPTOM/CONDITION:
When performing a front end alignment, there may be insufficient adjustment available to obtain the specified caster angle.
PARTS REQUIRED:
2
Lower Control Arm
4741704
2
Adjuster Bolts
6503332
2
Adjuster Cams
6503333
2
Nuts
**11502815**
REPAIR PROCEDURE:
This bulletin involves installing two longer lower control arms and new caster adjusting cams and bolts.
1.
Using the procedures outlined in the 1993 Grand Cherokee/Grand Wagoneer Service Manual (Publication No. 81-370-3147), replace both lower
control arms with P/N 4741704 and install the new caster adjusting bolts and cams.
2.
Perform a front end alignment.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No.
02-10-76-90
1.3 Hrs.
FAILURE CODE: P8 - New Part
