Grand Cherokee 4WD L6-242 4.0L VIN S MFI (1993)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
NOTE:
The IAC motor is mounted to the throttle body adjacent to the throttle position sensor.
REMOVAL
1.
Disconnect the electrical connector from the IAC motor.
AIS Motor - Removal/Installation
2.
Remove IAC motor torx head mounting screws.
3.
Remove IAC motor.
INSTALLATION
1.
Install IAC motor into throttle body and tighten retaining screws.
2.
Connect electrical connector to IAC motor.
