Grand Cherokee 4WD L6-242 4.0L VIN S MFI (1993)
Fig. 107 Adjusting Screw Bracket and Spring Removal
(19) Remove adjusting screw bracket, line pressure adjusting screw, pressure regulator valve spring and switch valve spring (Fig. 107). Do not remove
throttle pressure adjusting screw from bracket and do not disturb setting of either adjusting screw during removal.
Fig. 10Accumulator Housing Screw Locations
(20) Loosen left-side 3-4 accumulator housing attaching screw about 2-3 threads. Then remove center and right-side housing attaching screws (Fig.
108).
Fig. 109 Removing 3-4 Shift and Converter Clutch Valve Springs and Plug
(21) Carefully rotate 3-4 accumulator housing upward and remove 3-4 shift valve spring and converter clutch valve plug and spring (Fig. 109).