Grand Cherokee 4WD L6-242 4.0L VIN S MFI (1993)
(2)
Drive out pinion gear from housing with rawhide or plastic hammer. Catch the pinion with your hand to prevent it from falling and being
damaged. This will damage the front bearing rollers and bearing cup. The front bearing and cup must be replaced.
(3)
Remove the pinion gear seal with a slide hammer or pry out with bar.
(4)
Remove oil slinger, front bearing.
(5)
Remove the front pinion bearing cup and seal with Remover D-147 and Handle C-4171.
