Grand Cherokee 4WD L6-4.0L VIN S (1997)
Mounting Bolt Dimensions
CAUTION: Check caliper bolt length before proceeding. If the bolts have a shank length greater than 67.6 mm (2.66 inches), they will contact
the inboard brake shoe causing a partial apply condition.
5. Lubricate and install caliper mounting bolts. Start bolts by hand then tighten bolts to 10-20 Nm (7-15 ft. lbs.).
6. Fill and bleed brake system. See: Brake Bleeding/Service and Repair
7. Install wheel and tire assemblies.
8. Lower vehicle.
