Grand Cherokee 4WD V6-3.7L (2009)
4. Install axle shaft (1) See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Axle Shaft/Service and Repair/Rear
Axle - C213R/Installation.
5. Install the axle shaft flange nuts (1). Tighten to 119 Nm (88 ft.lbs.).
6. Install the wheel speed sensor (2) See: Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and Repair/Wheel Speed Sensor -
Installation/Rear.
